Публикации

Functional and Mechanical Properties of As-Deposited and Heat Treated WAAM-Built NiTi Shape-Memory Alloy

Khismatullin A.; Panchenko O.; Kurushkin D.; Kladov I.; Popovich A.

Metals 
2022, 12(6), 1044

DOI: 10.3390/met12061044

 

Effect of thermal history on microstructure evolution and mechanical properties in wire arc additive manufacturing of HSLA steel functionally graded components

Panchenko, O.; Kladov, I.; Kurushkin, D.; Zhabrev L.; Rylkov E.; Zamozdra M.

Materials Science and Engineering: A 
August 2022, Volume 851, 143569

DOI: 10.1016/j.msea.2022.143569

 

Gas Metal Arc Welding Modes in Wire Arc Additive Manufacturing of Ti-6Al-4V

Panchenko, O.; Kurushkin, D.; Isupov, F.; Naumov, A.; Kladov, I.; Surenkova

Materials 
2021, 14(9), 2457
DOI: 10.3390/ma14092457

 

Impact of impulses on microstructural evolution and mechanical performance of al-mg-si alloy joined by impulse friction stir welding

Morozova I., Naumov A., Obrosov A., Weiß S., Michailov V.

Materials 
2021, 14(2), 1-16 (347)
DOI: 10.3390/ma14020347

 

The Coatings Breakdown Products Influence on the Gas Metal Arc Welding Parameters

Leonid Zhabrev, Dmitry Kurushkin, Igor Mushnikov, Oleg Panchenko

Coatings 
2020, 10(11), 1061
DOI: 10.3390/coatings10111061 

 

Microstructural evolution and mechanical performance of Al-Cu-Li alloy joined by friction stir welding

Naumov A., Isupov F., Rylkowe E., Polykov P., Panteleev M., Skupov A., T. Amancio-Filho S., Panchenko O.

Journals of Materials Research and Technology 
2020, JMRTEC 2291
DOI: 10.1016/j.jmrt.2020.10.008

 

A high-performance WAAM process for Al–Mg–Mn using controlled short-circuiting metal transfer at increased wire feed rate and increased travel speed

Panchenko O., Kurushkin D., Mushnikov I., Khismatullin A., Popovich A.

Materials and Design
2020, 195,109040
DOI: 10.1016/j.matdes.2020.109040

Comparison of porosity evaluation methods using the example of dissimilar metal joints

Kurushkin D., Mushnikov I., Rylkov E., Panchenko O., Golubev I.

Key Engineering Materials
822, с. 129-134
DOI: 10.4028/www.scientific.net/KEM.822.129

Finite element simulation of temperature field during friction surfacing of Al-5Mg consumable rod

Isupov F., Panchenko O., Zhabrev L., Mushnikov I., Rylkov E., Popovich A.

Key Engineering Materials
2019, 822, с. 737-744
DOI: 10.4028/www.scientific.net/KEM.822.737

The method of carbon nanotubes addition in to Al-Cu dissimilar friction stir welded joint

Panchenko O., Chen K., Vilaca P., Isupov F., Shamshurin A.

NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application
2019, с. 57-62
ISBN: 978-808729489-5

Development of dissimilar metal joints porosity evaluation method

Kurushkin D., Mushnikov I., Rylkov E., Isupov F., Panchenko O.

MS and T 2019 - Materials Science and Technology 2019
2019, с. 1027-1033
DOI: 10.7449/2019/MST_2019_1027_1033

Numerical simulation of temperature distribution and material flow during friction stir welding of magnesium alloy

Rylkov E.N., Naumov A.A., Isupov F.Yu., Panchenko O.V., Popovich A.A.

MS and T 2019 - Materials Science and Technology 2019
2019, с. 1034-1040
DOI: 10.7449/2019/MST_2019_1034_1040

Effect of сomposition and thickness of organosilicate coatings on the arc welding process

Zhabrev L.A., Chuppina S.V., Panchenko O.V., Repin I.L., Popovisch A.A.

Russian Journal of Applied Chemistry,
92(9), 2019, с. 1274-1283
DOI: 10.1134/S1070427219090131

Microstructure and mechanical properties of dissimilar Al – Cu joints formed by friction stir welding

Ryl’kov, E.N., Isupov, F.Y., Naumov, A.A., Panchenko, O.V., Shamshurin, A.I.

Metal Science and Heat Treatment
2019, 60(11-12), с. 734-738
DOI: 10.1007/s11041-019-00348-8

Effect of the temperature of friction stir welding on the microstructure and mechanical properties of welded Joints of an Al – Cu – Mg alloy

Naumov, A.A., Isupov, F.Y., Golubev, Y.A., Morozova, Y.N.

Metal Science and Heat Treatment
2019, 60(11-12), с. 695-700
DOI: 10.1007/s11041-019-00342-0

Consumable tool for coating deposition by joint deformation of the base and tool materials

Isupov, F.Y., Panchenko, O.V., Naumov, A.A., Alexeeva, M.D., Zhabrev, L.A., Popovich, A.A.

Russian Metallurgy (Metally)
2019(13), с. 1399-1406
DOI: 10.1134/S0036029519130111

Comparative analysis of the mechanical properties of the friction stir welding joints of various aluminum alloys

Ryl’kov, E.N., Isupov, F.Y., Naumov, A.A., Panchenko, O.V., Zhabrev, L.A.

Russian Metallurgy (Metally)
2019(13), с. 1531-1536
DOI: 10.1134/S0036029519130329

Metallurgical and mechanical characterization of high-speed friction stir welded AA 6082-T6 aluminum alloy

Naumov A., Morozova I., Rylkov E., Obrosov A., Isupov F., Michailov V., Rudskoy A.

Materials
Volume 12, Issue 24, 2019, 4211
DOI: 10.3390/MA12244211

Влияние состава и толщины органосиликатных покрытий на процесс электродуговой сварки.

Жабрев Л.А., Чуппина С.В., Панченко О.В., Репин И.Л., Попович А.А.

Журнал прикладной химии.
2019, Т. 92, Вып. 9, с. 1197–1206

Макроструктура и механические свойства алюминиевых Al-Si-, Al-Mg-Si-, Al-Mg-Mn-сплавов, полученных электродуговым аддитивным выращиванием.

Панченко О.В., Жабрев Л.А., Курушкин Д.В., Попович А.А.

Металловедение и термическая обработка металлов №11, 2018
с. 63-69

Микроструктура и механические свойства разнородных соединений Al – Cu, полученных сваркой трением с перемешиванием.

Рыльков Е.Н., Исупов Ф.Ю., Наумов А.А., Панченко О.В., Шамшурин А.И.

Металловедение и термическая обработка металлов №11, 2018
с. 48-53

Влияние температуры при сварке трением с перемешиванием на микроструктуру и механические свойства сварных соединений из Al – Cu – Mg-сплава

Наумов А.А., Исупов Ф.Ю., Голубев Ю.А., Морозова Ю.Н.

Металловедение и термическая обработка металлов №11, 2018
с. 8-13

Development of methodology to determine the temperature influence on microstructure evolution during friction stir welding

Anton A. Naumov, Fedor Yu. Isupov, Iurii A. Golubev, Iuliia N. Morozova, Cornelius Spree

Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_795_802
pp. 795-802

Comparative analysis of the mechanical properties of aluminum alloys welded joints obtained by friction stir welding

Fedor Yu. Isupov, Anton A. Naumov, Oleg V. Panchenko, Leonid A. Zhabrev, Anatoliy A. Popovich

Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_867_874
pp. 867-874

Finite element simulation of temperature field during FSW of dissimilar Al-Cu joint

Evgenii N. Rylkov, Anton A. Naumov, Fedor Yu. Isupov, Oleg V. Panchenko

Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_875_881
pp. 875-881

Local Mechanical Properties Estimation of Friction Stir Welded Al-Mg-Si Joints

Oleg V. Panchenko, Sergey Yu. Ivanov, Anton A. Naumov, Fedor Yu. Isupov, Anatoly A. Popovich

Proceedings of the Twenty-eighth (2018) International Ocean and Polar Engineering (ISOPE) Conference
Sapporo, Japan, June 10-15, 2018
ISBN 978-1-880653-87-6; ISSN 1098-6189
pp. 172-174

Dissimilar Welding of Cu and Al Alloys by Friction Stir Welding and Impulse Friction Stir Welding

Anton A. Naumov, Fedor Y. Isupov, Oleg V. Panchenko, Evgenii N. Rylkov

Proceedings of the Twenty-eighth (2018) International Ocean and Polar Engineering (ISOPE) Conference
Sapporo, Japan, June 10-15, 2018
ISBN 978-1-880653-87-6; ISSN 1098-6189
pp. 166-171

Studying of sintered WC-8Co powder with coatings of aluminum oxide produced by atomic layer deposition.

Maximov, M.Y., Verevkin, A.S., Orlova, A.A.,Novikov P.A., Silin A.O, Panchenko, O.V., Popovich

Journal of Ceramic Processing Research
18(2), pp. 103-107, 2017

Использование технологических приемов для повышения прочности разнородных соединении, полученных сваркои трением с перемешиванием

Р.А. Рзаев, А.А. Чуларис, А.С. Досимов, А.А. Наумов, О.Г. Зотов

Вектор науки ТГУ.
2018. № 1 (43). С. 67-76.

Микроструктура и механические свойства швов после различных режимов импульсной сварки Al - Mg - Si-сплавов трением с перемешиванием

Кондратьев С.Ю., Морозова Ю.Н., Голубев Ю.А., Хантельманн К., Наумов А.А., Михайлов В.Г.

Металловедение и термическая обработка металлов.
2017. № 11 (749). С. 25-30

Numerical simulation and experimental investigationon impulse Friction Stir Welding of 6082-T6 aluminum alloy

Iurii Golubev, Iuliia Morozova, Anton Naumov, Cord Hantelmann, Nikolay Doynov, Vesselin Michailov

Contributed Papers from Materials Science and Technology 2017 (MS&T17)
pp. 987-994.

Friction stir welding of dissimilar in thickness Al-5Mg alloy butt joints

Anton A. Naumov, Evgenii V. Chernikov, Fedor I. Isupov, Oleg V. Panchenko

Contributed Papers from Materials Science and Technology 2017 (MS&T17)
pp. 971-977.

Temperature distribution and welding distortion measurements after fsw of al 6082-t6 sheets

Golubev I.A., Chernikov E.V., Naumov A.A., Michailov V.G.

Friction Stir Welding and Processing VIII
2016. pp. 289-295.

Prediction of the Properties of Heat-Affected Zone of Welded Joints of Sheets from Aluminum Alloys with Structured Surface

В. Г. Михайлов

Metal Science and Heat Treatment.
Vol. 58, Nos. 1 – 2, May, 2016, pp. 46-50

Optimization technique for arc welding of structured sheet

В. Г. Михайлов, С. Ю. Иванов, В. А. Кархин, О. В. Панченко

METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1463-1468
(проиндексирована WOS в 2016 году)

Research of temperature distribution during friction stir welding of 2 mm Aw 6082 sheets

В. Г. Михайлов, А. А. Наумов, Ю. А. Голубев, Е. В. Черников

METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1433-1438
(проиндексирована WOS в 2016 году)

Numerical simulation of sheet profiling process from aluminum alloy

В. Г. Михайлов,С. В. Ганин, В. Н. Цеменко, Г. Е. Коджаспиров, Ф. Ю. Исупов

METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1463-1468
(проиндексирована WOS в 2016 году)

Numerical simulation and microstructure analysis of friction stir welded Al 6082

В. Г. Михайлов, А. А. Наумов, Ю. А. Голубев, Е. В. Черников

METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1423-1428
(проиндексирована WOS в 2016 году)

Friction stir processing of metals is a new method of intensive plastic deformation

Е. В. Черников, А. А. Наумов

Tsvetnye metally.
2014, Issue:4, pp.36-40
(статья опубликована в 2014 году но была проиндексирована WoS в 2015 году)

Developing finite element model of the friction stir welding for temperature calculation

В. Г. Михайлов, А. А. Наумов, Ю.А. Голубев

METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings.
2014, pp. 1242-1248
(статья опубликована в 2014 году но была проиндексирована WoS в 2015 году)

Hybrid composite materials aluminum – Carbon nanostructures

В. Г. Михайлов, Т. С. Кольцова

Journal Material Science (Medziagotyra).
Volume 21, Issue 3, 27 July 2015, Pages 372-375

Effect of hot pressing modes on the structure and properties of an ‘aluminum – Carbon nanofibers’ composite material.

В.Г. Михайлов, О.В. Толочко, Т.С. Кольцова

Metal Science and Heat Treatment.
Vol. 56, Nos. 9 – 10, January, 2015

Fabrication of a Compacted Aluminum–Carbon Nanofiber Material by Hot Pressing

T. S. Kol’tsova, F. M. Shakhov, A. A. Voznyakovskii, A. I. Lyashkov, O. V. Tolochko, A. G. Nasibulin, A. I. Rudskoi, and V. G. Mikhailov

Technical Physics.
2014, Vol. 59, No. 11, p. 1626–1630