Functional and Mechanical Properties of As-Deposited and Heat Treated WAAM-Built NiTi Shape-Memory Alloy
Khismatullin A.; Panchenko O.; Kurushkin D.; Kladov I.; Popovich A.
Metals
2022, 12(6), 1044
DOI: 10.3390/met12061044
Effect of thermal history on microstructure evolution and mechanical properties in wire arc additive manufacturing of HSLA steel functionally graded components
Panchenko, O.; Kladov, I.; Kurushkin, D.; Zhabrev L.; Rylkov E.; Zamozdra M.
Materials Science and Engineering: A
August 2022, Volume 851, 143569
DOI: 10.1016/j.msea.2022.143569
Gas Metal Arc Welding Modes in Wire Arc Additive Manufacturing of Ti-6Al-4V
Panchenko, O.; Kurushkin, D.; Isupov, F.; Naumov, A.; Kladov, I.; Surenkova
Materials
2021, 14(9), 2457
DOI: 10.3390/ma14092457
Impact of impulses on microstructural evolution and mechanical performance of al-mg-si alloy joined by impulse friction stir welding
Morozova I., Naumov A., Obrosov A., Weiß S., Michailov V.
Materials
2021, 14(2), 1-16 (347)
DOI: 10.3390/ma14020347
The Coatings Breakdown Products Influence on the Gas Metal Arc Welding Parameters
Leonid Zhabrev, Dmitry Kurushkin, Igor Mushnikov, Oleg Panchenko
Coatings
2020, 10(11), 1061
DOI: 10.3390/coatings10111061
Microstructural evolution and mechanical performance of Al-Cu-Li alloy joined by friction stir welding
Naumov A., Isupov F., Rylkowe E., Polykov P., Panteleev M., Skupov A., T. Amancio-Filho S., Panchenko O.
Journals of Materials Research and Technology
2020, JMRTEC 2291
DOI: 10.1016/j.jmrt.2020.10.008
A high-performance WAAM process for Al–Mg–Mn using controlled short-circuiting metal transfer at increased wire feed rate and increased travel speed
Panchenko O., Kurushkin D., Mushnikov I., Khismatullin A., Popovich A.
Materials and Design
2020, 195,109040
DOI: 10.1016/j.matdes.2020.109040
Comparison of porosity evaluation methods using the example of dissimilar metal joints
Kurushkin D., Mushnikov I., Rylkov E., Panchenko O., Golubev I.
Key Engineering Materials
822, с. 129-134
DOI: 10.4028/www.scientific.net/KEM.822.129
Finite element simulation of temperature field during friction surfacing of Al-5Mg consumable rod
Isupov F., Panchenko O., Zhabrev L., Mushnikov I., Rylkov E., Popovich A.
Key Engineering Materials
2019, 822, с. 737-744
DOI: 10.4028/www.scientific.net/KEM.822.737
The method of carbon nanotubes addition in to Al-Cu dissimilar friction stir welded joint
Panchenko O., Chen K., Vilaca P., Isupov F., Shamshurin A.
NANOCON 2018 - Conference Proceedings, 10th Anniversary International Conference on Nanomaterials - Research and Application
2019, с. 57-62
ISBN: 978-808729489-5
Development of dissimilar metal joints porosity evaluation method
Kurushkin D., Mushnikov I., Rylkov E., Isupov F., Panchenko O.
MS and T 2019 - Materials Science and Technology 2019
2019, с. 1027-1033
DOI: 10.7449/2019/MST_2019_1027_1033
Numerical simulation of temperature distribution and material flow during friction stir welding of magnesium alloy
Rylkov E.N., Naumov A.A., Isupov F.Yu., Panchenko O.V., Popovich A.A.
MS and T 2019 - Materials Science and Technology 2019
2019, с. 1034-1040
DOI: 10.7449/2019/MST_2019_1034_1040
Effect of сomposition and thickness of organosilicate coatings on the arc welding process
Zhabrev L.A., Chuppina S.V., Panchenko O.V., Repin I.L., Popovisch A.A.
Russian Journal of Applied Chemistry,
92(9), 2019, с. 1274-1283
DOI: 10.1134/S1070427219090131
Microstructure and mechanical properties of dissimilar Al – Cu joints formed by friction stir welding
Ryl’kov, E.N., Isupov, F.Y., Naumov, A.A., Panchenko, O.V., Shamshurin, A.I.
Metal Science and Heat Treatment
2019, 60(11-12), с. 734-738
DOI: 10.1007/s11041-019-00348-8
Effect of the temperature of friction stir welding on the microstructure and mechanical properties of welded Joints of an Al – Cu – Mg alloy
Naumov, A.A., Isupov, F.Y., Golubev, Y.A., Morozova, Y.N.
Metal Science and Heat Treatment
2019, 60(11-12), с. 695-700
DOI: 10.1007/s11041-019-00342-0
Consumable tool for coating deposition by joint deformation of the base and tool materials
Isupov, F.Y., Panchenko, O.V., Naumov, A.A., Alexeeva, M.D., Zhabrev, L.A., Popovich, A.A.
Russian Metallurgy (Metally)
2019(13), с. 1399-1406
DOI: 10.1134/S0036029519130111
Comparative analysis of the mechanical properties of the friction stir welding joints of various aluminum alloys
Ryl’kov, E.N., Isupov, F.Y., Naumov, A.A., Panchenko, O.V., Zhabrev, L.A.
Russian Metallurgy (Metally)
2019(13), с. 1531-1536
DOI: 10.1134/S0036029519130329
Metallurgical and mechanical characterization of high-speed friction stir welded AA 6082-T6 aluminum alloy
Naumov A., Morozova I., Rylkov E., Obrosov A., Isupov F., Michailov V., Rudskoy A.
Materials
Volume 12, Issue 24, 2019, 4211
DOI: 10.3390/MA12244211
Влияние состава и толщины органосиликатных покрытий на процесс электродуговой сварки.
Жабрев Л.А., Чуппина С.В., Панченко О.В., Репин И.Л., Попович А.А.
Журнал прикладной химии.
2019, Т. 92, Вып. 9, с. 1197–1206
Макроструктура и механические свойства алюминиевых Al-Si-, Al-Mg-Si-, Al-Mg-Mn-сплавов, полученных электродуговым аддитивным выращиванием.
Панченко О.В., Жабрев Л.А., Курушкин Д.В., Попович А.А.
Металловедение и термическая обработка металлов №11, 2018
с. 63-69
Микроструктура и механические свойства разнородных соединений Al – Cu, полученных сваркой трением с перемешиванием.
Рыльков Е.Н., Исупов Ф.Ю., Наумов А.А., Панченко О.В., Шамшурин А.И.
Металловедение и термическая обработка металлов №11, 2018
с. 48-53
Влияние температуры при сварке трением с перемешиванием на микроструктуру и механические свойства сварных соединений из Al – Cu – Mg-сплава
Наумов А.А., Исупов Ф.Ю., Голубев Ю.А., Морозова Ю.Н.
Металловедение и термическая обработка металлов №11, 2018
с. 8-13
Development of methodology to determine the temperature influence on microstructure evolution during friction stir welding
Anton A. Naumov, Fedor Yu. Isupov, Iurii A. Golubev, Iuliia N. Morozova, Cornelius Spree
Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_795_802
pp. 795-802
Comparative analysis of the mechanical properties of aluminum alloys welded joints obtained by friction stir welding
Fedor Yu. Isupov, Anton A. Naumov, Oleg V. Panchenko, Leonid A. Zhabrev, Anatoliy A. Popovich
Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_867_874
pp. 867-874
Finite element simulation of temperature field during FSW of dissimilar Al-Cu joint
Evgenii N. Rylkov, Anton A. Naumov, Fedor Yu. Isupov, Oleg V. Panchenko
Contributed Papers from Materials Science and Technology 2018 (MS&T18)
October 14–18, 2018, Greater Columbus Convention Center, Columbus, Ohio, USA, 2018
DOI 10.7449/2018/MST_2018_875_881
pp. 875-881
Local Mechanical Properties Estimation of Friction Stir Welded Al-Mg-Si Joints
Oleg V. Panchenko, Sergey Yu. Ivanov, Anton A. Naumov, Fedor Yu. Isupov, Anatoly A. Popovich
Proceedings of the Twenty-eighth (2018) International Ocean and Polar Engineering (ISOPE) Conference
Sapporo, Japan, June 10-15, 2018
ISBN 978-1-880653-87-6; ISSN 1098-6189
pp. 172-174
Dissimilar Welding of Cu and Al Alloys by Friction Stir Welding and Impulse Friction Stir Welding
Anton A. Naumov, Fedor Y. Isupov, Oleg V. Panchenko, Evgenii N. Rylkov
Proceedings of the Twenty-eighth (2018) International Ocean and Polar Engineering (ISOPE) Conference
Sapporo, Japan, June 10-15, 2018
ISBN 978-1-880653-87-6; ISSN 1098-6189
pp. 166-171
Studying of sintered WC-8Co powder with coatings of aluminum oxide produced by atomic layer deposition.
Maximov, M.Y., Verevkin, A.S., Orlova, A.A.,Novikov P.A., Silin A.O, Panchenko, O.V., Popovich
Journal of Ceramic Processing Research
18(2), pp. 103-107, 2017
Использование технологических приемов для повышения прочности разнородных соединении, полученных сваркои трением с перемешиванием
Р.А. Рзаев, А.А. Чуларис, А.С. Досимов, А.А. Наумов, О.Г. Зотов
Вектор науки ТГУ.
2018. № 1 (43). С. 67-76.
Микроструктура и механические свойства швов после различных режимов импульсной сварки Al - Mg - Si-сплавов трением с перемешиванием
Кондратьев С.Ю., Морозова Ю.Н., Голубев Ю.А., Хантельманн К., Наумов А.А., Михайлов В.Г.
Металловедение и термическая обработка металлов.
2017. № 11 (749). С. 25-30
Numerical simulation and experimental investigationon impulse Friction Stir Welding of 6082-T6 aluminum alloy
Iurii Golubev, Iuliia Morozova, Anton Naumov, Cord Hantelmann, Nikolay Doynov, Vesselin Michailov
Contributed Papers from Materials Science and Technology 2017 (MS&T17)
pp. 987-994.
Friction stir welding of dissimilar in thickness Al-5Mg alloy butt joints
Anton A. Naumov, Evgenii V. Chernikov, Fedor I. Isupov, Oleg V. Panchenko
Contributed Papers from Materials Science and Technology 2017 (MS&T17)
pp. 971-977.
Temperature distribution and welding distortion measurements after fsw of al 6082-t6 sheets
Golubev I.A., Chernikov E.V., Naumov A.A., Michailov V.G.
Friction Stir Welding and Processing VIII
2016. pp. 289-295.
Prediction of the Properties of Heat-Affected Zone of Welded Joints of Sheets from Aluminum Alloys with Structured Surface
В. Г. Михайлов
Metal Science and Heat Treatment.
Vol. 58, Nos. 1 – 2, May, 2016, pp. 46-50
Optimization technique for arc welding of structured sheet
В. Г. Михайлов, С. Ю. Иванов, В. А. Кархин, О. В. Панченко
METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1463-1468
(проиндексирована WOS в 2016 году)
Research of temperature distribution during friction stir welding of 2 mm Aw 6082 sheets
В. Г. Михайлов, А. А. Наумов, Ю. А. Голубев, Е. В. Черников
METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1433-1438
(проиндексирована WOS в 2016 году)
Numerical simulation of sheet profiling process from aluminum alloy
В. Г. Михайлов,С. В. Ганин, В. Н. Цеменко, Г. Е. Коджаспиров, Ф. Ю. Исупов
METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1463-1468
(проиндексирована WOS в 2016 году)
Numerical simulation and microstructure analysis of friction stir welded Al 6082
В. Г. Михайлов, А. А. Наумов, Ю. А. Голубев, Е. В. Черников
METAL 2015 International Conference on Metallurgy and Materials, Conference Proceedings.
2015, Pages 1423-1428
(проиндексирована WOS в 2016 году)
Friction stir processing of metals is a new method of intensive plastic deformation
Е. В. Черников, А. А. Наумов
Tsvetnye metally.
2014, Issue:4, pp.36-40
(статья опубликована в 2014 году но была проиндексирована WoS в 2015 году)
Developing finite element model of the friction stir welding for temperature calculation
В. Г. Михайлов, А. А. Наумов, Ю.А. Голубев
METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings.
2014, pp. 1242-1248
(статья опубликована в 2014 году но была проиндексирована WoS в 2015 году)
Hybrid composite materials aluminum – Carbon nanostructures
В. Г. Михайлов, Т. С. Кольцова
Journal Material Science (Medziagotyra).
Volume 21, Issue 3, 27 July 2015, Pages 372-375
Effect of hot pressing modes on the structure and properties of an ‘aluminum – Carbon nanofibers’ composite material.
В.Г. Михайлов, О.В. Толочко, Т.С. Кольцова
Metal Science and Heat Treatment.
Vol. 56, Nos. 9 – 10, January, 2015
Fabrication of a Compacted Aluminum–Carbon Nanofiber Material by Hot Pressing
T. S. Kol’tsova, F. M. Shakhov, A. A. Voznyakovskii, A. I. Lyashkov, O. V. Tolochko, A. G. Nasibulin, A. I. Rudskoi, and V. G. Mikhailov
Technical Physics.
2014, Vol. 59, No. 11, p. 1626–1630